Your One-Stop Shop for Program Supplies
Program-Specific Supplies
MTECH Apparel & Gear
Classroom Essentials
Snacks & Beverages
Materials List
Materials List
REQUIRED Materials | notes | cost |
|---|---|---|
Safety Glasses | Required all 4 years. Available for purchase in the MTECH Store | $5.00 |
TI-30Xa- Scientific Calculator or TI- 30X-IIS- Scientific Calculator | Required all 4 years. Available for purchase in the MTECH Store | $10.75 |
Delmar’s Standard Textbook of Electricity, 7th Edition | Required for 1A, 1B, 2A, and 2B. Purchased in the 1A course. | Included in course fees. |
Mike Holt Electrical Exam Preparation – 2023 Code | Required starting in 4A. | Included in course fees. |
Ugly’s Electrical References, 2023 | Required all 4 years. Purchased in the 1A course. | Included in course fees. |
Tablet or Laptop | Students are given a tablet in the 1A course. | Included in course fees. |
2023 NEC Code Book | Required all 4 years. Purchased in the 1A course. | Included in course fees. |
Mike Holt’s Understanding the NEC Volume 1 – 2023 Code | Purchased/required in 1A, and in subsequent courses. ISBN: 978-1-950431-77-9 | $75.00 |
Mike Holt’s Understanding the NEC Volume 2 – 2023 Code | Purchased/required in 2B, and in subsequent courses. ISBN: 978-1-950431-78-6 | $70.00 |
Electrical Motor Controls for Integrated Systems, 5th Edition | Purchased in the 3A course. ISBN: 978-0-8269-1226-8 | $150.00 |
Materials List
Materials | NOTES | COST |
|---|---|---|
Safety Glasses | Can be purchased in the MTECH Store. | $5.00 |
Tablet | Included in course fees. | |
Modern Refrigeration and Air Conditioning (MRAC) 22nd Edition – 2 Year Access | Purchased in Introduction to Air Conditioning, Heating, and Refrigeration. Used in all subsequent courses. | Included in course fees. |
Essential Electrical Skills 2nd Edition for HVACR | ONLY purchased for HVACR Electrical Essentials course | Included in course fees. |
International Fuel Gas Code 2021 | ONLY purchased for Introduction to HVACR Careers | Included in course fees. |
HVAC Refrigerant Charging Quick Card | Purchased in Heating Systems course and used in all subsequent courses. | Included in course fees. |
RMGA Study Guide | ONLY purchased for Introduction to HVACR Careers | Included in course fees. |
EPA-608 Study Guide Mainstream Engineering | ONLY purchased for Introduction to Air Conditioning, Heating and Refrigeration | Included in course fees. |
Code Check Plumbing & Mechanical 7th Edition | Purchased in Heating Systems course. | Included in course fees. |
ACCA’s Manual H: Heat Pump Systems – Principles and Applications | Purchased in Heating Systems course and used in all subsequent courses. | $54.00 |
Inverter Mini Split Operation and Service Procedures | Purchased in Heating Systems course and used in all subsequent courses. ISBN: 978-1733817264 | $99.99 |
Introduction to Residential HVAC Systems HVAC 1.0 (1st edition) | ONLY purchased for Introduction to HVACR Careers, and Introduction to Air Conditioning, Heating, and Refrigeration. | $29.99 |
The Fundamentals of HVAC Direct Digital Control (4th edition) | Purchased and ONLY used for Advanced Control and Exit Skills course. | $110 |
Materials List
REQUIRED materials | notes | cost |
|---|---|---|
Safety Glasses | Required all 4 years. Available for purchase in the MTECH Store | $5.00 |
Non-programmable calculator | Required all 4 years. Available for purchase in the MTECH Store | |
Modern Plumbing Bundle, 9th Edition | Only for 1A &1B courses | Included in course fees. |
Mathematics for Plumbers and Pipefitters, 8th Edition | Required all 4 years. Purchased in 1A. | Included in course fees. |
2021 International Plumbing Code Book (IPC) | Required all 4 years. Purchased in 1A. | Included in course fees. |
2019 NFPA 13D Sprinkler System | Required for 2A – 4B courses. | Included in course fees. |
2021 International Mechanical Code Book (IMC) | Required for 3A – 4B courses. | Included in course fees. |
2021 International Fuel Gas Code Book (IFGC) | Required for 3A – 4B courses. | Included in course fees. |
Utah Amendments and Rule 317-4 | Included in course fees. | |
Tablet or Laptop | Required all 4 years. | Student is issued a tablet in 1A which is included in the 1A course fees. |
OSHA 10 | Only for 1B course. | Included in course fees. |
OPTIONAL materials | notes | cost |
|---|---|---|
Calculated Industries 4065 Construction Calculator | This is the calculator recommended by most plumbing instructors. All plumbing students are REQUIRED to have a simple non-programmable calculator all 4 years of the program. | $52.00 |
Transfer Options
REQUIRED Materials | notes | cost |
|---|---|---|
Advanced Emergency Care and Transportation of the Sick and Injured | 4th Edition – Premier Access ISBN: 9781284244120 | included in course fees |
Blood Pressure Kit | Available in the MTECH Store | 40 |
AEMT Shirt | Available in the MTECH Store | 13 |
Utility Pants | Price may vary; not available in the MTECH Store; see instructor for details | varies |
NREMT National Written Test Fee | Required for employment; not paid to MTECH | 159 |
OPTIONAL materials | notes | cost |
|---|---|---|
EMT Hooded Sweatshirt | Available in the MTECH Store | 20 |
EMT Hat | Available in the MTECH Store | 14 |
Transfer Options
| Optional Materials | Notes (ISBN numbers, quantity, etc) | Cost |
| Basic Life Support Healthcare Provider Course Manual | 1 | $20.00 |
| Replacement Card | Please email SuAnn Bird (SBird@mtec.edu) for a replacement card | $5.00 |
| Total Cost of Optional Materials | $25.00 |
Transfer Options
required Materials | Notes | Cost |
|---|---|---|
Modern Dental Assisting Textbook 14th Edition | 9780323824408 | included in fees |
Dental Terminology Textbook | 9780357456828 | included in fees |
Infection Control Gown; 3-pack | included in fees | |
TB Test | 1 – Cost may vary depending on health insurance | varies |
Hepatitis B (series of 3) | 1 – Cost may vary depending on health insurance | varies |
Scrubs | 2 – Ordered through Logo It On according to your program | $100.00 |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Colored Pencils | 8 color minimum | $3.00 |
Dental Instrument Pocket Guide | 9780323672436 | $47.00 |
Transfer Options
REQUIRED materials | notes | cost |
|---|---|---|
Emergency Care and Transportation of the Sick and Injured | 12th Edition – Premier Access ISBN 9781284227215 | included in course fees |
Blood Pressure Kit | Available in the MTECH Store | $40 |
EMT Shirt | Available in the MTECH Store | $13 |
Utility Pants | Price may vary; Not available in the MTECH Store See instructor for details | varies |
Pen Light | Available in the MTECH Store | $3 |
OPTIONAL materials | notes | cost |
|---|---|---|
EMT Hooded Sweatshirt | Available in the MTECH Store | $20 |
EMT Hat | Available in the MTECH Store | $14 |
Transfer Options
Materials | notes | cost |
|---|---|---|
Blesi’s Medical Assistant Textbook | 9th Edition; ISBN: 9780357502815 | Included in course fees |
Blood Pressure Kit | available in the MTECH Store | $40.00 |
Scrubs | Students will order scrubs through the program store of Safeguard; it is recommended to purchase at least two sets | Cost may vary |
Background Check and Drug Screen | paid to Verified Credentials; more information available from the Program Coordinator | $106.00 |
Transfer Options
REQUIRED materials | notes | costs |
|---|---|---|
Hartman’s Nursing Assistant Care: Long Term Care Textbook 5th Edition | ISBN: 9781604251371 | included in course fees |
Hartman’s Nursing Assistant Care: Long Term Care Workbook 5th Edition | ISBN: 9781604251388 | included in course fees |
Blood Pressure Kit | available in the MTECH online store | $40 |
Scrubs | Recommended to have two sets | Depends on brand and style |
Transfer Options
REQUIRED Materials | Notes | Cost | |||||
|---|---|---|---|---|---|---|---|
Textbook Bundle including the following books: Pharmacy Practice for Technicians; 7th ed, Pharmacology for Technicians; 7th ed, Pharmacy Labs for Technicians; 4th ed, Certification Exam Review for Technicians; 5th ed. | 9788765717349 | included in course fees | |||||
Background Check and Drug Screen | BCI and Workmed | $58.00 | |||||
Pharmacy Technician Trainee License | paid to DOPL; required to do externship | $50.00 | |||||
Utah State License Application Fee | paid to DOPL | $95.00 | |||||
Transfer Options
Materials | Notes | Cost |
|---|---|---|
Phlebotomy Essentials Textbook 8th Edition | 9781284312997 | Included in fees |
Scrubs | Cost is for two sets | $50.00 |
Transfer Options
REQUIRED materials | notes | cost |
|---|---|---|
Textbooks/Workbooks | Bundle | included in course fees |
Practical Nursing Entrance Exam – TEAS Test | Must be taken before applying for the program | $90 |
Scrubs | Students will order their scrubs through an online PN program store. It is recommended to purchase at least 2 sets. | varies (approximately $100) |
My Clinical Exchange | Software Program | included in course fees |
Background Check and Drug Screen | Students will complete this after acceptance into the program | $100 |
Laptop | Student Preference | varies |
Immunizations | varies | |
Blood Pressure Kit and Stethoscope | Available in the MTECH Online Store | $40 |
Watch with Second Hand | Student Preference | varies |
Black Closed Toe Shoes | Student Preference | varies |
Utah State PN License Fee | Paid to DOPL after graduating from the program and passing the NCLEX-PN Exam | $100 |
OPTIONAL materials | notes | cost |
|---|---|---|
Lab Coat | Students will order this through an online PN program store | varies (approximately $50) |
Transfer Options
REQUIRED MATERIALS | NOTES | COST |
|---|---|---|
Bontrager’s Textbook of Radiographic and Related Anatomy, 10th Edition | 9780323653671 | Included in course fees |
Bontrager’s Workbook of Radiographic Positioning and Related Anatomy, 10th Edition | 9780323694230 | Included in course fees |
Bontrager’s Handbook of Radiographic Positioning and Related Anatomy – Pocket Size and Spiral Bound, 10th Edition | 9780323694223 | Included in course fees |
Principles of Radiographic Imaging: An Art and A Science, 6th Edition | 9781337711067 | Included in course fees |
Medical Terminology: A Short Course | 9780323479912 | Included in course fees |
Scrubs | Students will order scrubs through the program store of Logo It On; it is recommended to purchase at least two setS | Cost may vary |
DOPL Application Processing Fee | Paid to DOPL, required for license | $70 |
Lanyard/Badge Holder | $10 | |
HCA Clinical Fee | $10 | |
Rad Tech Boot Camp | $170 | |
Lead Markers | $20 | |
Lab Supplies | $150 |
OPTIONAL Materials | notes | cost |
|---|---|---|
Radiographic Imaging and Exposure, 6th Edition | 9780323661393 | $65 |
Patient Care in Radiography, 10th Edition | 9780323654401 | $40 |
Radiation Protection in Medical Radiography, 9th Edition | 9780323825030 | $45 |
Radiologic Science for Technologists | 9780323661348 | $110 |
Transfer Options
REQUIRED Materials | Notes | Cost |
|---|---|---|
Central Service Technician Manual & Workbook 9th Edition | N/A | included in course fees |
Scrubs | Ordered through Safeguard | $100.00 |
Background Check and Drug Screen | Students will pay Verified Credentials directly | $105.25 |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Rulers | $1.00 | |
Industrial Sharpies | $2.00 |
Transfer Options
Materials | QUANTITY | Notes | Cost |
|---|---|---|---|
Cengage Unlimited – Access for Surgical Technologists | 1 | Students will receive the access code on the first day of class | included in course fees |
Background Check and Drug Screen | 1 | Students will pay Verified Credentials directly | $105.25 |
Scrubs | 2 | Cost may vary; Students will order their scrubs through SafeGuard according to the program scrub store | $100.00 |
Materials List
| Required Materials | Quantity | Notes (ISBN numbers, etc) | Cost |
| Advanced Bread and Pastry Textbook | 1 | Included in Course Fees | |
| MTECH Chef Uniform | 1 | Embroidered jacket, pants, hat, marker | Included in Course Fees |
| Total Cost of Required Materials | $0.00 |
Materials List
REQUIRED Materials | Notes | Cost | ||
|---|---|---|---|---|
Cosmetology Kit | Included in Course Fees | |||
Textbooks | Included in Course Fees | |||
State Board Kit Rental | Required for State of Utah Practial Exam. If kit is returned with all equipment student will receive a $40 refund. Does not include any consumable supplies to be returned | $80 | ||
Computing Device with Audio/Video Capabilities and online connectivity | $0 | |||
OPTIONAL Materials | Notes | Cost | |
|---|---|---|---|
Additional Mannequins | up to 10 additional mannequins may be required. Each mannequin is approximately $45 | $450 | |
Materials List
Materials | Notes | cOST |
|---|---|---|
On Cooking Textbook | 978-0-13444-190- | Included in Course Fees |
Thermoworks ProNeedle Culinary Thermometer | Included in Course Fees | |
Visual Knife Skills Set I | MS1 024 | Included in Course Fees |
Small Knife Set w/Bag | Sysco 8″ CHEF’S KNIFE-MILLENNIA M22608B; 8″ BREAD KNIFE-MILLENNIA M22508B; 3″ PARING KNIFE M23900; 10″ STEEL -GENESIS M21010B; KNIFE ROLL-7 POCKETS; M30007M | Included in Course Fees |
Chef Uniform | Embroidered Chef Coat, Pants, Hat, Marker | $66 |
Access to personal computing device and internet connectivity | This program is a hybrid program and requires online learning. Access to a personal computing device is required for online learning | $0 |
OPTIONAL Materials | Notees | Cost |
|---|---|---|
Large Knife Set w/bag: | Sysco 8″ CHEF’S KNIFE-MILLENNIA M22608B; 8″ X 2″ KNIFE GUARD M33113; 3″ PARING M23900; 4″ X 1″ KNIFE GUARD M33110; 10″ WIDE BREAD KNIFE – MILLENNIA M23210B; 10″ X 2″ KNIFE GUARD M33112; 6″ BONING KNIFE-MILLENNIA M22306B; 6 X 1″ KNIFE GUARD M33111; MINI MERCER RULES – ENGLISH M33243; SWIVEL PEELER-PLASTIC HANDLE M33091; KNIFE ROLL-7 POCKETS M30007M | $110 |
Materials
All Hair Design Kit items, supplies and books are included in the course fees
Materials List
Materials | Notes | Cost |
|---|---|---|
Nail Technician Kit | Included in Fees | |
Textbooks | Included in Fees | |
State Board Kit Rental | This kit is required for the State of Utah Practical Exam. If kit is returned with all equipment, student will receive a $40 refund. Does not include any consumable supplies to be returned | $80 |
Computing Device with Audio/Video Capabilities and Online Connectivity | A portion of some courses will be done online. Students will be required to provide their own device with audio and video capabilities as well as their own internet connectivity. Students should be prepared to complete up to 8 hours of online learning each week they are in the Program | $0 |
Materials List
REQUIRED Materials | Notes | Cost |
|---|---|---|
Internet connectivity for remote learning | This program is a hybrid program and requires remote learning outside of in-person hours. Access to a computer and the internet is required. | Varies |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Additional Monitor/Connection Cables for remote learning | This program is a hybrid program and requires remote learning outside of in-person hours. Access to a computer and the internet is required. Access to a second monitor is recommended. | Varies |
Materials List
Materials | Notes | Cost |
|---|---|---|
Online (internet) connectivity for at home learning | This program is a hybrid program and requires online learning as well as virtual attendance each Friday. Access to a internet connectivity is required. | $0 |
32gb Flashdrive | Included in Course Fees | |
Website Hosting and Domain Fees | Personal WordPress website hosting and domain fee for one (1) year | $60 |
Materials List
materials | notes | cost |
|---|---|---|
Website Hosting and Domain Fees | Personal WordPress website hosting and domain fee for one (1) year | $60 |
Access to a personal computer device and internet connectivity | This program is a hybrid program and requires online learning. Access to a personal computing device with the ability to run the Adobe Suite and internet connectivity is required for online learning. | $0 |
Materials List
REQUIRED Materials | notes | cost |
|---|---|---|
Online (internet) connectivity for at home learning | This program is a hybrid program and requires online learning as well as virtual attendance. Access to a internet connectivity is required. | $0.00 |
1-year subscription – Cengage E-Learning Materials | 1-year subscription: $190.00; If program enrollment exceeds one year – this fee will be have to be paid for a second year | Included in Course Fee |
OPTIONAL materials | notes | cost |
|---|---|---|
CompTIA: A+ Core 1 | Additional Exam Voucher | $112.00 |
CompTIA: A+ Core 2 | Additional Exam Voucher | $112.00 |
CompTIA: Network+ | Additional Exam Voucher | $173.00 |
CompTIA: Security + | Additional Exam Voucher | $262.00 |
Materials List
REQUIRED Materials | Notes | Cost |
|---|---|---|
Online internet connectivity for at-home learning | This program is a hybrid program and requires online learning as well as virtual attendance. Access to internet connectivity is required. | $0.00 |
Option 1: Use of own personal computing device – pre-approval required by Program Coordinator | To be eligible for this fee, students must have their own Apple device that meets these specifications: 8 GB Memory; 128GB SSD; USB or HDMI Ports. Students must produce their device and have the Mobile Development Coordinator test and approve their device in order to obtain permission for the reduced fee. | $0.00 |
Option 2: MacBook Air – Grey | Program fee includes: MacBook Air (13.6 inch): 8-Core CPU, 8-Core GPU, 8GB Unified Memory, 256GB SSD, m3 chip | $1,000.00 |
Option 3: MacBook Pro 14″ – Gray | Program fee includes: MacBook Pro (14 inch): 8-Core CPU, 10-Core GPU, 16GB Unified Memory, 1TB SSD, m3 chip | $1,900.00 |
Apple Developer Account | This program requires that students put an App on the Apple App Store. That requires every student to have a developer account. | $99.00 |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Additional Monitor/Connection Cables for at home learning | This program is a hybrid program and requires online learning as well as virtual attendance. Access to a second monitor is suggested | $0.00 |
Materials List
Materials | Notes | Cost |
|---|---|---|
Online (internet) connectivity for at home learning | This program is a hybrid program and requires online learning as well as virtual attendance each Friday. Access to a internet connectivity is required. | $0.00 |
Fordney’s Medical Insurance Bundle 16th Edition | 17th Edition, 9780443108785 | Included in Course Fees |
SimChart for the Medical Office: Learning the Medical Office Workflow – 2022 Edition | 2024 Edition, 9780443261848 | Included in Course Fees |
ICD-10 CM Expert Textbook | 2024 Edition or 2025 Edition | Included in Course Fees |
CPT Professional Textbook | 2024 Edition or 2025 Edition | Included in Course Fees |
HCPCS Expert Textbook | 2024 Edition or 2025 Edition | Included in Course Fees |
Medical Terminology & Anatomy for Coding | 5th Edition, 9780443110931 | Included in Course Fees |
Pocket Anatomy & Physiology | 4th Edition, 9781719642958 | Included in Course Fees |
Therapeutic Communication for Health Care Professionals | 5th Edition, Access Code, 9780357619032 | Included in Course Fees |
3×5 Index Cards | Included in Course Fees | |
Headphones | Included in Course Fees | |
Durable 1″ index Tabs for Coding Manuals | Included in Course Fees | |
Highlighers; Yellow + One Additional Color | Included in Course Fees | |
Notebook, 1 Subject College Ruled Paper | Included in Course Fees | |
Red Pen | Included in Course Fees | |
Mechanical Pencil | Included in Course Fees | |
Black Pen | Included in Course Fees | |
Flash Drive: 8GB | Included in Course Fees |
Materials
No required materials
Materials List
REQUIRED Materials | Notes | Cost |
|---|---|---|
ONLINE (INTERNET) CONECTIVITY FOR AT HOME LEARNING | This program is a hybrid program and requires online learning. Access to internet connectivity is required | $0.00 |
Option 1: Use of own personal computing device – pre-approval required by Program Coordinator | To be eligible for this fee, students must have their own Apple or PC laptop that meets these specifications: | $0.00 |
Option 2: MacBook Air – Grey | MacBook Air (13.6 inch); 8-Core GPU, 8GB Unified Memory, 256 GB SSD, m3 chip | $1000.00 |
Option 3: Macbook Pro 14″ – Gray | MacBook Pro (14 inch); 8-Core CPU, 10 Core GPU 16GB Unified Memory, 1 TB SSD, m3 chip | $1900.00 |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Additional monitor/connection cables for at home learning | This program is a hybrid program and requires online learning as well as virtual attendance. Access to a second monitor is suggested | $0.00 |
Materials List
Materials | Notes | Costs | |
|---|---|---|---|
Safety Glasses | Available in the MTECH Store | $4.00 | |
SACA Annual Subscription | ($7/applicable course) | Included in fees within each course | |
AMATROL E-Learning Annual Subscription | ( $17/course) | Included in fees within each course |
Materials List
Materials | notes | cost |
|---|---|---|
Modern Automotive Technology 10th Edition (Goodheart/Wilcox) | 9781649254177 | Included in Student Fees |
Tablet (Samsung) | Included in student fees | |
Tablet Case | Included in student fees | |
Flashlight | Available in the MTECH Store | $7.00 |
Shop Work shirt | Available in the MTECH Store, Students are required to purchase 1 shirt | $35.00 |
Tool Kit | Students may bring or purchase their own tools, but aren’t required to do so | $0.00 |
Safety Glasses | Available in the MTECH Store | $4.00 |
Materials | Notes | Cost |
|---|---|---|
BlueDriver Bluetooth Pro OBD2 Car Diagnostic Scan Tool | For Iphone & Android | $100 |
Materials List
No materials required
Materials List
REQUIRED Materials | Notes | Cost |
|---|---|---|
State of Utah CDL Driver Handbook | (supplied by the CDL Program) | |
FDOT Daily Hours of Service Log Book |
| (supplied by the CDL Program) |
Federal Motor Carrier Safety Regulations (JJ Keller) |
| (supplied by the CDL Program) |
CDL Practice Testing Materials |
| (supplied by the CDL Program) |
Road Atlas |
| (in class use only) |
OPTIONAL Materials | Notes | Cost |
|---|---|---|
Flashlight | Recommended | Students may purchase on their own, but not required for class |
Leather Gloves | Recommended | Students may purchase on their own, but not required for class |
Additional Test Attempts | Students must pay for additional attempts | 2 test attempts are covered in Program fees |
Materials List
Materials | Notes | Cost |
|---|---|---|
Blueprint Reading for Welders; 9th Edition | Included in Course Fees | |
Rigging Handbook; 5th Edition | Included in Course Fees | |
PipeFitters Bluebook | Included in Course Fees | |
Required Tools, PPE | Available at the MTECH Store | $377.00 |
Materials List
REQUIRED materials | notes | cost |
|---|---|---|
Systems 2E & Engines 2E CDX Online Bundle 2 year access | 978-128-427-5018 | included in fees |
Tablet (Android) and Safety Case | provided to students on first day of class | included in fees |
Coveralls | one pair | included in fees |
Safety Glasses | available in the MTECH Store | $4.00 |
Tool Kit | Students need to purchase tools from an outside vendor. Costs are approximate and may vary, Tool list will be given on the first day of class. | cost varies |
OPTIONAL materials | notes | cost |
|---|---|---|
Coveralls | Additional pairs are available in the MTECH online Store | $48.00 |
Materials List
Materials | notes | cost | |
|---|---|---|---|
Precision Machining Technology, 3rd Edition | 978-0831133328 | Included in Fees | |
Machinery’s Handbook, 32nd Edition, Tool Box Edition | 978-0-83113-731-1 | Included in Fees | |
Machinist Tool Kit | Not required the first day of class, this will be discussed the first week of class | $1456.00 |
Materials List
Materials | Notes | Cost | |||||
AWS Online Access | Annual $75 AWS Online Access Fee | Included in Program Fees | |||||
Welding Equipment & Practice Pipe | 2 soapstone holders, 1 mild steel & 1 stainless steel wire brush, 4 grinding discs, 4 tungsten sticks | $475.00 | |||||
Welding Helmet | $70 | ||||||
Protective Clothing | 2 canvas jackets, 1 SMAW & 1 GMAW gauntlet gloves 4 lens replacements, 2 safety glasses, | $100 | |||||
Exam Materials for Industry Certifications | $108 | ||||||
Leather Safety Toed Boots | Not Sold at Bookstore |
| $30 | ||||
Additional Test Coupons | Pipe Coupons, per each set, Prices subject to change per market value | $22 |
Materials List
No materials required
Materials List
No materials required
Materials List
materials | notes | cost |
|---|---|---|
AWS Online Subscription | Annual $75 AWS Online Access fee | Included in course fees |
Blueprint Reading for Welders; 9th Ed. | Included in course fees | |
Gas Metal Arc Welding Technical Guide | Included in course fees | |
Flux Cored Arc Welding Technical Guide | Included in course fees | |
Shielded Metal Arc Welding Technical Guide | Included in course fees | |
Gas Tungsten Arc Welding Technical Guide | Included in course fees | |
Welding Equipment | 2 soapstone holders, 1 mild steel & 1 stainless steel wire brush, 4 grinding discs, 4 tungsten sticks | $240 |
Welding Helmet | $70 | |
Protective Clothing | 2 canvas jackets, 1 SMAW & 1 GMAW gauntlet gloves 4 lens replacements, 2 safety glasses, | $100 |
Exam Materials for Industry Certifications | $20 | |
Leather Safety Toed Boots | varies | |
Chipping Hammer | Can be purchased in the MTECH Store or at Norco | $8 |
Spark Striker and Tip Cleaner | Can be purchased in the MTECH Store or at Norco | $5 |
Combination Square | Can be purchased in the MTECH Store or at Norco | $10 |
Vice Grips and Welpers | Can be purchased in the MTECH Store or at Norco | $10 |
4 1/2″ Grinder | Can be purchased in the MTECH Store or at Norco | $97 |
Tape Measure | Can be purchased in the MTECH Store or at Norco | $10 |
Fillet Weld Gauge | Can be purchased in the MTECH Store or at Norco | $48 |
GTAW- 3/32″ Collet, Collet Body, Back Cap, insulator and GTAW torch cup | Can be purchased in the MTECH Store or at Norco | $20 |
Test Coupons (will need to purchase for each test) | 1 per student – 3/8″ Plate Coupons | $10/each |
Test Coupons (will need to purchase for each test) | 1 per student – 1″ Plate Coupons | $20/each |
Transfer Options TEMPLATE
28 CREDITS
A.A.S Business Management
Utah Valley University
30 CREDITS
A.A.S. Healthcare Services
Utah Valley University
18 CREDITS
A.S. Pre-Health Professions
Snow College
21 CREDITS
Any Undergraduate Certificate
Weber State University
21 CREDITS
Any Associate Degree Program
Weber State University
21 CREDITS
Any Baccalaureate Degree Program
Weber State University
TEMPLATE
30 CREDITS
A.A.S. Healthcare Services
Utah Valley University
30 CREDITS
A.A.S. Technology Degree
Utah Valley University
Learn More
28 CREDITS
A.A.S Business Management Degree
Utah Valley University
Learn More
18 CREDITS
Utah Valley University
INFO 1200 – 3 credits
Computer Programming I for IST
INFO 2200 – 3 credits
Computer Programming II for IST
INFO 2420 – 3 credits
Web Application Design
INFO 281R – 3 credits
Internship
INFO 1900 – 6 credits
Elective
15 CREDITS
Utah Valley University
CS 1400 – 3 credits
Fundamentals of Programming
CS 1410 – 3 credits
Object Oriented Programming
CS 481R – 3 credits
Independent Study
CS 2550 – 3 credits
Web Programming I
CS 3380 – 3 credits
JavaScript Software Development
18 CREDITS
A.A.S. General Technology
Utah State University
Learn More
24 CREDITS
A.S. Engineering Technology
Snow College
Learn More
18 CREDITS
A.A.S. Technology Degree
Utah State University
INFO 2410 – 3 credits
Database Fundamentals (3 credits)
INFO 3130 – 3 credits
Introduction to Applied Data Analytics
IM 2010 – 3 credits
Business Computer Proficiency
ELE 1234 – 6 credits
Elective Credits
18 CREDITS
A.A.S. Technology Degree
Utah Valley University
INFO 2410 – 3 credits
Database Fundamentals (3 credits)
INFO 3130 – 3 credits
Introduction to Applied Data Analytics
IM 2010 – 3 credits
Business Computer Proficiency
ELE 1234 – 6 credits
Elective Credits
30 CREDITS
A.A.S. Technology Degree
Utah Valley University
Learn More
9 CREDITS
Course Transfer
Utah Valley University
ESEC 3060 – 9 credits
Emergency Medical Technician Advanced
10 CREDITS
Any Undergraduate Certificate
Weber State University
10 CREDITS
Any Associate Degree Program
Weber State University
10 CREDITS
Any Baccalaureate Degree Program
Weber State University
How to get your school materials:
Textbooks: Will receive all required textbooks on the first day of class.
Materials: Order through the online MTECH Store. Will be delivered in a parcel locker for pick up.
Refunds
- Refunds and returns may be made via credit or debit card only.
- Clothing may only be returned if the tags are still intact and the item is not stained, washed, or worn.
- Merchandise may be returned or exchanged if it is unused and in original packaging, or if the item was broken/defective when purchased by the customer.
- All textbook returns require manager approval.
- Textbooks that are shrink-wrapped with codes or other sensitive material may not be returned once opened, no exceptions.
- All clearance sales are final.
How to use your in-store voucher
- Email bookstore.orders@mtec.edu to initiate your voucher.
- Wait for a confirmation email with your voucher details.
- Visit the bookstore during store associate hours to redeem your voucher for in-store purchases.
Note: Vouchers can only be activated after you attend your first day of class.
Locations and Hours of Operation
Lehi Campus
2301 W Ashton Blvd.
Lehi, UT 84048
Building A
Monday - Thursday:
8:00 AM - 6:30 PM
Friday:
8:00 AM - 5:00 PM
Saturday - Sunday:
Closed
Orem Campus
1410 West 1250 South
Orem, UT 84058
Building A
Monday - Thursday:
8:00 AM - 6:30 PM
Friday:
8:00 AM - 5:00 PM
Saturday - Sunday:
Closed
Payson Campus
933 South 1953 W
Payson, UT 84651
Monday - Thursday:
8:00 AM - 6:30 PM
Friday:
8:00 AM - 5:00 PM
Saturday - Sunday:
Closed
Need additional information?
MTECH Store
bookstore.orders@mtec.edu
801-753-4167